High-speed cutting
A lightweight, robust motion structure is paired with maximum acceleration stated at up to 1.5G.
Bodor A Series · Enclosed single-platform sheet laser
Bodor A Series Fibre Laser Cutting Machine UK
A practical route into enclosed fibre laser cutting for UK manufacturers. The Bodor A Series combines straightforward operation, high-dynamic motion and intelligent cutting functions with World Machinery specification, installation, training and long-term support.
Laser power, working area, options and performance depend on the selected configuration, material and application. Confirm all details in a current written World Machinery quotation.
1.5G
maximum acceleration stated for the current A Series platform
3048 × 1524
working area highlighted on the current World Machinery page
Fully enclosed
operator-focused machine and crossbeam protection
UK support
specification, installation, training and service
Reliable production without unnecessary complexity
Designed to make everyday sheet-metal laser cutting easier to adopt and operate.
The A Series focuses on the parts of production that matter most to growing fabrication businesses: useful cutting speed, intuitive controls, safer enclosure, repeatable quality and intelligent tools that reduce setup time and material waste.
Easy operation
Clear controls and intelligent functions help make daily cutting, setup and maintenance more approachable.
Flexible specification
Power, working area and optional functions can be matched to material mix, sheet size and production targets.
Intelligent setup assistance
Cutting parameter auto-match helps turn experience into repeatable results.
The A Series workflow can use sample-part comparisons and stored process knowledge to help operators select suitable cutting parameters. The aim is to reduce trial-and-error, improve consistency and shorten the route from drawing to acceptable part.
Faster setup
Reduce time spent manually testing and adjusting initial process parameters.
Consistent quality
Support more repeatable edge quality across recurring materials and thicknesses.
Operator confidence
Provide a clearer starting point for new and developing operators.
Enclosed production
A protected cutting area designed for a safer, cleaner workshop environment.
The current A Series presentation highlights a complete safety light curtain and enclosed crossbeam protection. World Machinery can review guarding, extraction, floor loading, access and utilities as part of the final UK installation plan.
Enclosed cutting zone
Helps separate the active cutting process from surrounding workshop activity.
Safety light curtain
Supports controlled access around the single-platform machine layout.
Site-planning support
World Machinery can advise on power, extraction, access, floor and service requirements.
Efficiency improved · time valued
High-performance servo control supports responsive, stable movement.
Bodor describes the A Series as using high-performance bus servo motors to improve dynamic response and processing efficiency. Its published comparison states up to a 20% overall performance improvement against Bodor’s previous-generation product; real output depends on power, material, thickness, nesting and process settings.
1.5G
maximum acceleration stated by Bodor
20%
manufacturer comparison versus the previous generation
Single platform
straightforward material-loading arrangement
The 20% comparison is a manufacturer-published statement relative to Bodor’s previous-generation product, not a guaranteed result for every application.
Smart cutting functions
Reduce avoidable setup time, vibration and sheet waste.
The A Series brings together intelligent functions that support thin-sheet stability, parameter selection and the reuse of remnant material.
Process setupCutting parameter auto-match
Visual comparison of sample parts can help match process parameters to the required cutting result.
Thin-sheet controlSheet-edge anti-vibration
The laser-head response is adjusted to help maintain stable cutting when thin sheet moves under gas pressure.
Material utilisationRemnant layout
Upload a photograph of leftover material so the system can identify corners and assist with one-click remnant nesting. Availability is configuration dependent.
Laser scanning cutting
A different energy path for selected cutting applications.
Bodor presents laser scanning cutting as a way of increasing energy absorption within the cutting area compared with a traditional single-path approach. Suitability and availability depend on laser source, software, material, thickness and selected options.
01
Traditional cutting
A conventional cutting path concentrates energy along one direct travel line.
02
Scanning cutting
A scanning path repeatedly covers the cutting area to increase effective energy interaction.
Scanning path diagram
The current World Machinery page uses this visual to explain the repeated path pattern.
High-reflective sheet capability
The existing page also highlights cutting of reflective sheet materials. Confirm material, thickness and source compatibility during application review.
Specify the machine around real production
Choose power, sheet size and options from your parts—not from a headline figure.
A useful quotation starts with your material mix, maximum thickness, common sheet size, monthly workload and desired level of automation. World Machinery can then recommend the appropriate A Series configuration and supporting equipment.
Materials and thickness
List mild steel, stainless steel, aluminium, brass or copper together with typical and maximum thickness.
Working area
Match the bed format to stock sheets, finished-part dimensions and available factory space.
Laser power
Balance cutting speed, maximum thickness, gas strategy and capital cost around your actual production mix.
Extraction and handling
Plan extraction, loading, unloading, storage and future automation as one connected workflow.
World Machinery UK support
From first cutting trial to long-term service support.
The machine is only one part of a successful investment. World Machinery supports application review, demonstration, installation, commissioning, operator training, maintenance and finance planning for UK manufacturers.
Application review
Review parts, materials, thicknesses, cycle time and quality expectations before specification.
Cutting trials
Use representative material and components to assess edge quality, speed and process suitability.
Installation and training
Coordinate delivery, commissioning, calibration and practical operator handover.
Service and maintenance
Protect uptime with UK technical support, planned checks and access to parts.
A Series questions
What UK manufacturers usually ask before specifying a Bodor A Series.
Final answers depend on the selected laser source, machine size, software, materials and optional equipment. World Machinery can provide a written configuration for your project.
What is the Bodor A Series designed for?
The A Series is positioned as a straightforward single-platform sheet-metal fibre laser for manufacturers seeking enclosed production, accessible operation and intelligent cutting assistance. The most suitable configuration depends on your material, thickness, sheet size and throughput targets.
What acceleration does the A Series provide?
Bodor states maximum acceleration of up to 1.5G for the current A Series platform. Achievable cycle time still depends on geometry, material, thickness, piercing, nesting, laser power and process settings.
Which laser powers and working areas are available?
Availability varies by model, market and current product configuration. The existing World Machinery page highlights a 3048 × 1524 mm format and selected power options, while Bodor publishes a wider international range. World Machinery should confirm the exact UK specification in writing.
Is the Bodor A Series fully enclosed?
The current product presentation highlights full enclosure around the cutting process, enclosed crossbeam protection and a safety light curtain. The final site arrangement, guarding and extraction should be confirmed during installation planning.
What does sheet-edge anti-vibration do?
It is intended to help maintain stable cutting when thin sheet vibrates or lifts under assist-gas pressure. The system adjusts laser-head response to support cutting quality and reduce collision risk.
Can the A Series reuse remnant sheet?
An optional remnant-layout workflow can identify leftover sheet from an uploaded photograph and assist with locating and nesting new parts. Confirm software and camera requirements for the chosen configuration.
Can World Machinery test my material before I order?
A demonstration or cutting trial can be arranged using representative material and part files. This is the best way to review edge quality, speed, gas use and handling requirements before final specification.
What support is available after installation?
World Machinery provides UK installation, commissioning, operator training and ongoing service support. Planned-maintenance and finance options can also be discussed as part of the project.
Plan your A Series project
Request a specification, cutting trial or live demonstration.
Send your material, maximum thickness, sheet size and production requirement. The World Machinery team can recommend a suitable A Series configuration and prepare current written figures.
Telephone01746 780154
Emailsales@worldmc.co.uk
View the current Bodor A Series manufacturer information ShowroomUnit 5 Alveley Industrial Estate
Alveley, Bridgnorth, Shropshire WV15 6HG
Alveley, Bridgnorth, Shropshire WV15 6HG
Tell us what you need to cut
Provide the basic application details below and the World Machinery team will contact you about the next step.